Oneonta Block Co.

6459 State Highway 23 Oneonta, NY 13820 607-432-6641 • Fax 607-433-6284

65 State Route 369 Port Crane, NY 13833 607-648-7051 • Fax 607-648-7050

Concrete Form Treatments

• Dyatic
• Spec Sheet       MSDS
  Chemically active material that softens, removes and prevents build-up on concrete tools, hardware, forming materials, etc. Build-up preventer and remover.

Curing Compounds

• Cure & Seal VOC
• Spec Sheet       MSDS
  A high solids, water clear acrylic copolymer that cures, seals, dustproofs and hardens freshly cast concrete. Contains JP-64 to assure adhesion and eliminate flaking. A high gloss film that provides maximum protection to slabs against common staining materials. Reduces slab clean-up costs up to 50%.

• FAA Cure WW
• Spec Sheet       MSDS
  A white-pigmented wax-based curing compound formulated to retain moisture in freshly poured concrete. The selected white pigments reflect the heat of the sun, keeping the concrete surface cooler. F.A.A. Cure W.W. is a membrane-forming material that retains the necessary moisture for proper cement hydration. F.A.A. Cure W.W. is formulated to comply with V.O.C. content limits, F.A.A. requirements, and meets ASTM C-309 specifications.

• Aquafilm
• Spec Sheet       MSDS
  Aquafilm is a ready to use water based evaporation retardant for concrete flatwork. Aquafilm reduces surface moisture evaporation in rapid-drying conditions (high temperature, low humidity, wind, direct sun). V.O.C. compliant.

Liquid Bonding Agents

• Special Bond
• Spec Sheet       MSDS
  A ready to use, polymer emulsion designed to modify Special Patch and other Portland Cement mixes. For improved compressive, flexural and adhesive strength. Special Bond also improves the abrasion, chemical and water resistance of modified mortars. Special Bond can also be used as a modifier for concrete, masonry, stucco, terrazzo and gypsum sand mixes.

• Primeflow
• Spec Sheet       MSDS
  Primeflow, a re-emulsifiable adhesive agent, is designed to be used with Conflow floor leveler. Its use is critical to the proper installation of Conflow. Primeflow serves as a sealer and creates a suitable surface for Conflow to adhere to. V.O.C. compliant.

• Weldtight
• Spec Sheet       MSDS
  A general purpose rewettable bonding agent, when delayed timing is necessary to place new concrete, stucco, plaster or cementitious repair mortars to existing concrete and masonry surfaces. V.O.C. compliant.

Protective Sealers

• Intraseal
• Spec Sheet       MSDS
  Intraseal is a penetrating water-based reactive siliconate solution specifically designed for protecting concrete floors against abrasion, dusting and spillage. Intraseal penetrates deeply creating an integral matrix that won't wear away. Intraseal imparts a low gloss, satin sheen with use without buffing. V.O.C. compliant.

• Super Seal
• Spec Sheet       MSDS
  A heavy duty interior and exterior curing and sealing compound for use on a wide range of concrete and exposed aggregate surfaces. V.O.C. compliant.

• Super Seal Gray
• Spec Sheet       MSDS
  Super Seal Gray is a ready to use, single package, standard gray pigmented sealing system. Super Seal Gray is specifically designed to cure and seal and add color to hide variation in concrete due to poor placement or finishing. Super Seal Gray is formulated for interior and exterior concrete and masonry floors.

Repair Products / Patches

• Special Patch
• Spec Sheet       MSDS
  A polymer-modified, cementitious two-component concrete repair mortar for use in thin and thick-section concrete patching and overlays. Conspec Special Patch provides excellent freeze-thaw resistance, superior adhesion and resistance against the penetration of de-icing salts and other contaminants. Ideal for repairing interior warehouse slabs or exterior concrete pavements.

• Faststop
• Spec Sheet       MSDS
  A durable, resistant, hydraulic cement formulated specifically for preventing water seepage through concrete or masonry walls and floors. When subject to water pressure, Faststop becomes hard and more resistant. Faststop sets in three to five minutes depending upon the temperature of the mixing water. It will not shrink or oxidize. Faststop will last the life of the structure.

Floor Levelers

• Conflow
• Spec Sheet       MSDS
  Self-Finishing and Leveling Composition. A self-leveling floor underlayment designed for interior use.

Accelerators & Retarders

• Q-Set
• Spec Sheet       MSDS
  A non-corrosive accelerating admixture which contains no calcium chloride. Q-Set quickens the hydration of cement resulting in shorter setting times and high early strength. Q-Set provides improved workability, helps prevent segregation and is a substantial aid in early stiffening for mortar and stucco mixes. Q-Set is an aqueous solution of organic and inorganic compounds that produces a rapid heat development of the mortar that protects it from freezing during its early life at low temperatures. V.O.C. compliant.

• C-Set
• Spec Sheet       MSDS
  An accelerating admixture for mortar, stucco and concrete. C-Set quickens the hydration of cement resulting in shorter setting times and higher early strengths. C-Set provides improved workability, helps prevent segregation and is a substantial aid in early stiffening for mortar and stucco mixes. C-Set is an aqueous solution of organic and inorganic compounds that produces a rapid heat development of the mortar that protects it from freezing during its early life at low temperatures. V.O.C. compliant.

Cleaners & Strippers

• Special Patch
• Spec Sheet       MSDS
  A heavy-duty emulsified citrus concrete cleaner/degreaser/stripper. Orange Peel is a V.O.C. compliant, non-etching concrete cleaner used to prepare surfaces for Conspec penetrating sealers or general maintenance. Used directly, Orange Peel will effectively help remove common curing and sealing compounds and cutback adhesives.