6459 State Highway 23
Oneonta, NY 13820
607-432-6641 • Fax 607-433-6284
65 State Route 369
Port Crane, NY 13833
607-648-7051 • Fax 607-648-7050
Oneonta Block Company

NMD 80 - New Masonry Detergent

NMD 80 GallonNMD 80 5 Gallon

NMD 80 - New Masonry Detergent

1 Gallon -   NMD80-1
5 Gallon -   NMD80-5

NMD 80 is a powerful detergent-based solution designed for safe and effective removal of efflorescence and mortar smears from masonry surfaces. It can be used on all masonry substrates including brick, stone, synthetic stone, pre-cast concrete, designer or colored block. Works great to remove polymeric sand haze. The added buffering ingredients allow NMD 80 to be powerful yet safe enough for glass and anodized aluminum. NMD 80 requires no respirator when working outdoors, preventing unnecessary fines. This product is capable of extremely effective cleaning and efflorescence removal without brushing or scrubbing and will leave the cream on the mortar joints.

Download NMD 80 Spec

Download NMD 80 Cleaning Process

Download NMD 80 MSDS

One Restore - Restoration Detergent
One Restore - 1 GallonOne Restore - 5 Gallon

One Restore - Restoration Detergent

1 Gallon -   1RESTORE-1
5 Gallon -   1RESTORE-5

OneRestore® is a breakthrough product that provides remarkable versatility, cleaning power and safety all in one. Capable of removing the deepest stains from virtually any surface, it is also used to safely restore glass and anodized aluminum.

OneRestore® can remove practically any metal oxide stain (including copper stains) and can be an effective coating remover. Safe on most surfaces and for use around people, OneRestore® is a great choice for cleaning and restoring colleges, schools, hospitals, government facilities and offices.

Download One Restore Spec

Download One Restore MSDS

EF-Fortless -  Efflorescence Cleaner
EF-Fortless - Efflorescence Cleaner

EF-Effortless - Efflorescence Cleaner

1 Gallon -   EF-1

EF-Fortless is a truly remarkable soap solution that melts away powdery efflorescence and haze from clean-up efflorescence, and helps to control its return. This product is mildly acidic and perfect for use on color sensitive surfaces, since it will not discolor brick, block or mortar. It can be used on slurry-dyed block and similar substrates. Simply apply EF-Fortless undiluted and wait for the foam to collapse. Reapply as needed until there is no foaming on contact. With EF-Fortless only, the product does not need to be rinsed from vertical surfaces (option). When used on horizontal surface it must be rinsed When using a sealer, rinse to remove any chemical residue that was not absorbed.

Download Ef-Fortless Spec

Download Ef-Fortless MSDS